The best dart grip is the lightest texture that stops the dart slipping in your fingers. Ringed barrels are a common starting point because they sit mid-scale on our 1 to 5 rating, where 1 is smooth and 5 is razor. Grippy darts rate 4 or 5. If you meant how to hold a dart, see our grip position guide.
The Golden Rule of Grip: More grip is not always better. An overly aggressive texture can "stick" to your fingers during release, causing the dart to veer off-target. The goal is to find the minimum amount of texture required to prevent slipping during your acceleration phase.
Already know your intensity number? Use the MyDartFinder tool to filter darts by grip zone and texture directly, alongside weight and barrel shape.
The 7 Dart Grip Types, From Smooth to Razor
Smooth Intensity 1
No machined texture. Relies entirely on the natural friction between skin and tungsten. Offers the cleanest possible release but is unforgiving of inconsistent finger placement.
Example: Mission Saturn Titan (Rating 1)
Ringed (Radial) Intensity 2-3
The industry standard. Consists of circular grooves cut around the barrel. Provides excellent registration points and consistent friction without being overly aggressive.
Example: Target Nathan Aspinall G1 (Rating 2)
Milled Intensity 3-4
Advanced machining that creates multi-directional patterns like diamonds or axial cuts. Milled grips help you feel exactly how the dart is oriented in your hand.
Example: Target Phil Taylor Power G10 (Rating 3)
Pixel Intensity 3-4
Small square or diamond-shaped indentations machined into the barrel. Provides high multi-directional grip without the sharp edges found in razor styles.
Example: Goat Sprocket 90% (Rating 3)
Razor Intensity 5
Hundreds of tiny, sharp-edged micro-cuts in the barrel surface, the most aggressive texture in the range. Retailers sometimes sell it as shark cuts or shark fin; a directional saw-tooth "shark" grip is a related variant that the database files under razor. Designed for maximum "bite." Excellent for preventing any forward slip, but the sharp edges can wear down or "chip" over time during tight groupings.
Example: Bull's Prime Bolt 90% (Rating 5)
Knurled Intensity 1-2
A cross-hatched, diamond-pattern texture rolled into the metal. It looks rough but offers relatively light grip, and the pattern can wear smoother with regular use over time.
Example: Red Dragon Valiant (Rating 2)
Nano Intensity not settled
An extremely fine, microscopic surface texture (tiny pits or an etched pattern rather than cut grooves). It feels almost velvet-like or "tacky" rather than rough. Best for players who find traditional rings too intrusive.
What Are Grippy Darts?
Grippy darts are barrels that rate 4 or 5 on our 1 to 5 scale. About one in nine rated darts in our database sits there, while nearly three in four rate 2 to 3 (as of November 2026). Razor is not the only route: milled and ringed barrels also reach the top of the scale. The Bull's Prime Bolt 90% CP is a razor rated 5, the Target 975 Ultra Marine 02 Swiss Point is a milled barrel rated 5, and the Harrows Supergrip Ultra 90% is a ringed barrel rated 4.5. Go there only if a lighter texture keeps slipping, because too much grip has its own cost, as the next section explains.
How Grip Intensity Affects Your Release
How firmly the barrel texture holds your fingers determines how cleanly the dart leaves them. High-precision barrels like the Target Scott Williams often use multi-zone grip patterns to solve this: an aggressive zone at the back for acceleration and a smoother zone at the front for a clean departure from the fingers. Your grip position and the barrel shape both influence which intensity level works best for you.
- Too much grip: The dart can cling to the fingers at release, stay in the hand too long and drop low on the board.
- Too little grip: The dart can slip out early and fly high, or feel loose in the hand.
- Grip pressure: We do not tie a specific hold pressure to a specific intensity, so let where your misses land guide you rather than how hard you squeeze.
Frequently Asked Questions
What is the best dart grip?
There is no single best dart grip for everyone. The usual advice is the lightest texture that stops the dart moving in your fingers, and a ringed barrel near the middle of the scale is a common place to start. If it slips, go up a level. If it drags at release, come down one.
Does more grip mean more accuracy?
Not necessarily. While it prevents slipping, an overly aggressive grip can snag on your fingers during release, introducing inconsistency. The right grip is the lightest one you can safely use without the dart moving in your hand.
Which grip is best for sweaty hands?
No single grip style is proven best for sweaty hands. The supported advice is a direction, not a style: look for a grippier dart (a higher grip intensity) and avoid a smooth barrel if your hands run moist.
How long does a razor grip last?
Razor grip softens with use because the sharp peaks of the ridges flatten or chip when they collide with other darts in the board. Manufacturer copy describes razor cuts as outlasting very fine micro grips. Expect an aggressive razor grip to soften noticeably with heavy board contact, without a reliable timescale.
What is PVD coating and does it affect grip?
PVD (Physical Vapor Deposition) is a thin-film coating process. Manufacturers market it as hardening the surface finish and protecting the machined edges of the grip from premature wear, though we have not found independent wear tests on darts; any change in how tacky the barrel feels is a secondary effect we have not confirmed.
Can I mix different grip types?
Yes. Many modern professional darts use multi-zone grip. For example, a dart might have a razor grip at the rear for the thumb and a ringed grip at the front for guiding fingers.
Filter the full database by exact grip style and intensity rating to find barrels with the feel you're after.
Find Darts With Your Exact Grip Style →Prefer to look around first? Browse the full database →